muC103T&Backends

$200.00$420.00

Clear

Description

 

Backend

 ModelInterface
1C8262USB
2C8203HDMI
3C8261CVBS

 


muC103T

muc103T is based on ov6946 which is using the most advance CMOS mixed signal technology. It integrates image array, signal processing, timing and control circuitry, all on a single chip. OV6946 captures high quality 400 x 400 resolution video at 30 frames per second (fps). It is well-suited to a wide range of endoscope applications, including medical, veterinarian, and industrial. It is ideal for applications requiring a small footprint, low power and low cost.

Features:

  • Small tip size : 1.52mm OD
  • Resolution: 400×400 pixels
  • Operation voltage 3.3V
  • Low power consumption
  • Cable size: 0.5mm OD
  • Cable length: 1M

 

Application Example

  • Inspection device
  • Endoscope

 

 

Specification

 

Imager CMOS imager sensor OVM6946
Optical Format 1/18”
Clock rate4MHz
Max exposure876 x T line
Video Output Analog
Scan mode Progressive
Data format Raw RGB
Picture Element 400x400 pixel
Pixel size 1.75x1.75um
Effective image area712x707um
S/N Ratio 34.4dB
Dynamic range 67.1dB
Operation Voltage 3.3VDC
Power consumption 25mW
Connector 6pin 2mm pitch
ConnectionGND, CLK, VOUT, NC, NC, 3.3V
Tip Dimension 1.52OD x 3.0 mm
Optical Spec
FOV 87.5 deg horizontal, 120 deg diagonal
F/No5.0
Relative Illumination 60.7%
Working Distance 4mm ~ infinity
IR cut off 665+/-10nm

 


C8262

C8262 is an advanced module for interfacing muC103T camera from COMedia. It is USB UVC compatible, good for those people has already had application software. It outputs MJPEG format such that users can manipulate the image data for specific application.

Features:

  • UVC compatible, no driver is needed for windows OS
  • Good for some kernel of Linux OS
  • Output 384×384 pixels at 30fps
  • MJPEG for video data output
  • LED to indicate operation status
  • Enter sleep mode when no data streaming
  • Simple operation for AWB
  • Mini USB connector
  • Powered by USB port

module with USB ut

 


C8203E103

This module has been designed for muC10x series and output real time video to HDMI/DVI
monitor. It performs still image capture as well as video recording and store files to SD card. It
has been designed for operation by DC5V or lithium battery.

Features:

  • Interface to muC103 series camera
  • Real time Video output
  • DVI output HD720p at 30fps
  • Simple operation for AWB
  • AVI recording and JPG snap shot
  • Store to SD card, up to 32G
  • Image quality fine tune possible
  • RTC with battery backup
  • Battery level detect and display on screen
  • 5VDC or 4.2V Li-ion battery operated
  • Built in battery charging
  • Individual GPIO for key input

module with HDMI output


C8261

This module has been designed to interface the micro camera muC103T, which has analog video signal interface. It provides TV interface to connect TV set.

 

Features:

    • Small size 22x55mm
    • Interface to muC103T
    • Auto White Balance
    • Real time Video output
  • Plug and play
  • Support NTSC or PAL Display
  • Image display in center of monitor
  • Latency <0.1sec
  • 5VDC operate

module with AV out

Additional information

Weight 0.2 kg
Dimensions 10 × 5 × 2 cm
Model

muC103T, muC103T+C8203E103, muC103T+C8261, muC103T+C8262

Datasheet

Packing List

muC103T
muC103T camera module1pcs
muC103T+C8261
  • muC103T camera module 
  • C8261  board
  • 2.0mm pitch 2Pin open ended wire for power 
  • 2.0mm pitch 2Pin open ended wire for AV
1pcs
1pcs
1pcs
1pcs
muC103T+C8262
  • muC103T camera module
  • C8262  board 
1pcs
1pcs
muC103T+C8203
  • muC103T camera module 
  • C8203  board 
  • 2.0mm pitch 2Pin open ended wire for power 
  • 2.0mm pitch 8Pin flat cable for keyboard
  • keyboard 
 
1pcs
1pcs
1pcs
1pcs
1pcs