muC108&Backends

$220.00$440.00

Clear

Description

 

Backend

 ModelInterface
1C8282PUSB
2C8203HDMI

 


muC108

muC108 is camera module  based on ov6948 which is using the most advance CMOS mixed signal technology. ov6948 integrates image array, signal processing, timing and control circuitry, all on a single chip. Initially developed for small-outer-diameter medical endoscopes and catheters, muC108 can be designed into a wide range of applications, including dental, veterinary, internet-of-things (IoT), industrial, wearable and forensic devices. It is ideal for applications requiring a small footprint, low power and low cost. It offers exceptional low-light sensitivity of 1000 mV/lux-sec.

Features:

  • Small tip size : 0.64×0.64×1.2mm
  • Resolution: 200×200 pixels
  • Operation voltage 3.3V
  • Low power consumption
  • Cable size: 0.5mm OD
  • Cable length: 1M

Optical center aligned with mechanical center

Application Example

  • Inspection device
  • Endoscope
  • IoT

 

 

Specification

 

Imager CMOS imager sensor OVM6948
Optical Format 1/36”
Clock rate4MHz
Max exposure792 x T line
Video Output Analog
Scan mode Progressive
Data format Raw RGB
Picture Element 200x200 pixel
Pixel size 1.75x1.75um
Effective image area364x364um
S/N Ratio 34.4dB
Dynamic range 67.1dB
Operation Voltage 3.3VDC
Power consumption 25mW
Connector 6pin 2mm pitch
ConnectionGND, CLK, VOUT, NC, NC, 3.3V
Tip Dimension 0.64 x 0.64 mm
Optical Spec
FOV 120 deg diagonal
F/No2.8
Relative Illumination 56.6%
Working Distance 3mm ~ 50mm
IR cut off 665+/-10nm

 

 


C8282P

C8282P is an advanced module for interfacing muC108 camera from COMedia. It is USB UVC compatible, good for those people has already had application software. It outputs MJPEG format such that users can manipulate the image data for specific application.

Features:

  • UVC compatible, no driver is needed for windows OS
  • Built in LED control circuit for illumination control
  • Good for some kernel of Linux OS
  • Output 384×384/192×192 pixels at 30fps
  • MJPEG for video data output
  • LED to indicate operation status
  • Enter sleep mode when no data streaming
  • Simple operation for AWB
  • Optional GPIO for PC program
  • USB type C connector
  • Powered by USB port

 

 


C8203E108

 

 

This module has been designed for muC108 and output real time video to HDMI monitor. It performs still image capture as well as video recording and store files to SD card. It has been designed for operation by DC5V or lithium battery.

Features:

  • Interface to muC108 camera
  • Real time Video output
  • DVI output HD720p at 30fps
  • Simple operation for AWB
  • AVI recording and JPG snap shot
  • Store to SD card, up to 32G
  • Image quality fine tune possible
  • RTC with battery backup
  • Battery level detect and display on screen
  • 5VDC or 4.2V Li-ion battery operated
  • Built in battery charging
  • Individual GPIO for key input

Additional information

Weight 0.2 kg
Dimensions 10 × 5 × 2 cm
Model

muC108, muC108+C8203E108, muC108+C8282P

Datasheet

Packing List

muC108
muC108 camera module1pcs
muC108+C8282P
  • muC108 camera module 
  • C8282P  board 
1pcs
1pcs
muC108+C8203
  • muC108 camera module 
  • C8203  board 
  • 2.0mm pitch 2Pin open ended wire for power
  • 2.0mm pitch 8Pin flat cable for keyboard 
  • keyboard 
 
1pcs
1pcs
1pcs
1pcs
1pcs